Free service hotline
Number of views:
SVES/ SVEM Series submerged Ultrafiltration Membrane Modules MBR Membrane Modules
Number of views:
Product serial number
SVES/ SVEM Seriessubmerged UltrafiltrationMembrane ModulesMBR Membrane Modules
Canpure fiber-reinforced membrane module has the characteristics of high strength, large flux and strong adaptability.
The membrane module is immersed inside membrane Cistern, and the system is highly integrated with good product water.
Canpure fiber-reinforced submerged UF membrane modulecan be applied in municipal/industrial waster water treatment,
high-concentration organic waste water treatment, and othersectors.
Canpure Fiber-Reinforced Membrane is a PVDF membrane with tubes, which has high capillary strength to effectively
prevent membrane capillaries from breakage.
No membrane peeling
With Canpure's thermal process inlay ,PVDF membrane is embedded and bind to the supporting tubes so that the
membrane “peeling off”problem is effectively solved .
High flux and low TMP
Canpure fiber reinforced membrane is formed by c-TIPS,so that the trans-membrane pressure is greatly reduced
by higher membrane porosity.
Strong Adaptability to Raw Water
Canpure Fiber-Reinforced Membrane has a strong adaptability to raw water and operates properly under great fluctuation
of raw water and temperature. It is applied in treatment of urban drinking water and municipal water, reuse of reclaimed water, sewage treatment, and other sectors.
Tolerating High-intensity Gas Scrubbing and Water Flushing
Canpure Fiber-Reinforced Membrane can tolerate high-intensity gas scrubbing and water back washing,and can effectively
prevent sludge accumulating inside membrane modules.
Double-end Water Production
Permeate water is produced from both the lower and upper ends in Canpure Fiber-Reinforced Membrane Modules. This
offers larger flux and more evendistribution of fouling load than traditional single-end water production mode, andalso effectively
reduces the TMP and prolongs the operation cycle.
Technical Parameters of SVES/SVEM Series Membrane Modules
①It can be adjusted by changing material formula.
②We need to double the gas for 5080 products.
③We have an outside diameter of 2.6mm、1.6mm products.
Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table