CP Series EDI Modules
Keywords:
CANPURE Environmental
Detailed
Introduction
Product Profile
(EDI, Electro - deionization) Electro-deionization is a kind of using mixed ion of anionic and cation of the water adsorption and ion exchange resin, at the same time, the adsorption of
ions and under the action of DC voltage, respectively through ion exchange membrane into the thick of anionic and cation very water chamber and removed, on the other hand, under the action of DC voltage, water can produce enough dissociation of H + ions and OH- ions, in order to realize the continuous deep desalting. This new technology can replace the traditional ion exchange (DI), produce the resistance rate is as high as 18 MΩ pure water. EDI's most significant advantage is that it no longer requires the regeneration of ion exchange resins with acids and bases, making it more environmentally friendly.
Product Features
Inlet water and concentrated water / Electrolyte water flow in reverse
(countercurrent) to avoid scaling.
Special ion exchange membrane, high exchange capacity, strong
selectivity.
No salt for operation, operation cost is reduced.
All water chambers are filled with resin to improve ion migrati on
efficiency and reduce energy consumption.
High frequency rectifier power supply, rectifier effect is bett er than
silicon control.
The waterway and circuit are on the same side, simple and beaut iful.
Electrical Specification
The current corresponds to EDI module one by one, the working
current is stable and the voltage is better controlled.
Plug in installation structure, plug-in form, input and output cable.
LED digital display, clear value.
As a power switch, the breaker can protect the circuit with fau lt.
Input protection, output protection, soft start current characteristic
protection, over temperature protection, flow protection.
Technical Parameters of CP Series EDI Modules
Related products
Related products
(EDI, Electro - deionization) Electro-deionization is a kind of using mixed ion of anionic and cation of the water adsorption and ion exchange resin, at the same time, the adsorption of ions and under the action of DC voltage, respectively through ion exchange membrane into the thick of anionic and cation very water chamber and removed, on the other hand, under the action of DC voltage, water can produce enough dissociation of H + ions and OH- ions, in order to realize the continuous deep desalting. This new technology can replace the traditional ion exchange (DI), produce the resistance rate is as high as 18 MΩ pure water. EDI's most significant advantage is that it no longer requires the regeneration of ion exchange resins with acids and bases, making it more environmentally friendly.
CPFC Series Flat Sheet MBR Membrane Modules
Canpure Flat Sheet MBR Membrane Module adopts PTFE membrane material, features highanti-fouling Capacity and low filtrationre sistance, suitable for gravity Filtration .It is manufactured by unique cassette Structure ,features higher packing density. Large filtration area.The module is designed stack and arranged,Large filtration area with small floor area and simple system integration and lower operating cost.
SVES/ SVEM Series Submerged Ultrafiltration Membrane Modules MBR Membrane Modules
Canpure fiber-reinforced membrane module has the characteristics of high strength, large flux and strong adaptability. The membrane module is immersed inside membrane cistern, and the system is highly integrated with good product water. Canpure fiberreinforced submerged UF membrane module can be applied in municipal/industrial waster water treatment, high-concentration organic waste water treatment, and other sectors.
SVS/SVM Series Submerged Ultrafiltration Membrane Modules MBR Membrane Modules
The Canpure curtain type membrane module adopts a full-open design to prevent polluting dead angles and is obviously advantageous in large-scale systems with the strengths such as strong adaptability to membrane water, high packing density and small floor space.
Online Message
Scan to follow us
Hunan Canpure Environmental Protection Technology Co., Ltd.
Address: No. 99, Fazhan Road, Ningxiang Economic and Technological Development Zone, Changsha City, Hunan Province
Phone: +8673188236666
Beijing Canpure Environmental Protection Technology Co., Ltd.
Address: Building 15-3, Ronghui Garden, Area B, Airport, Houshayu Town, Shunyi District, Beijing
Phone: +861084592919