SVEF Series Outside-in Ultrafiltration(UF) Membrane Modules
Keywords:
CANPURE Environmental
Detailed
Introduction
Product Profile
Canpure Outside-in Membrane Module has the characteristics of high strength, sufficient aeration, strong pollution resistance, strong chemical resistance, low pressure and high flux.SVEFOutside-in ultrafiltration(UF) membrane has strong adaptability to the change of raw water quality, easy operation and maintenance, stable and reliable water quality, and is suitable for the treatment of all kinds of groundwater, surface water, micro-polluted water, municipal wastewater/industrial wastewater reuse, seawater filtration and other occasions, can effectively remove water turbidity, suspended solids, colloids, microorganisms and other substances.
Product Features
High Strength
Canpure Fiber-Reinforced Membrane is a PVDF membrane with tubes, which has high capillary strength to effectively prevent membrane capillaries from breakage.
No membrane peeling
With Canpure's thermal process inlay ,PVDF membrane is embedded and bind to the supporting tubes so that the membrane “peeling off” problem is effectively solved.
Permanent hydrophilic property / proprietary technology/
During the preparation of Canpure Outside-in UF reinforced membrane, hydrophilic substances are added and special crosslinking technique is applied, endowing the permanent hydrophilic property of the capillary, more stable product water flux, impr oved anti-fouling property and better cleaning recovery.
High anti-oxidation performance
Canpure PVDF Outside-in UF reinforced membrane features high crystallinity, can tolerate oxidant with higher concentrat ion, and thus can achieve more profound cleaning effect and longer life.
High strength and large flux
Canpure Outside-in UF reinforced membrane has a capillary strength of higher than 169MPa, standard produced water flux 400L/m2·h·bar, at 25℃.
Unique aeration structure
Canpure Outside-in UF reinforced membrane adopts unique aeration device inside the module,ensuring more even aeration and better air cleaning effect.
Ultra low operating pressure
Canpure Outside-in ultrafiltration(UF)membrane assemblies typically operate at pressures as low as 0.02 MPa.
Technical Parameters of SVEF Series Outside-in UF Membrane Modules
①It can be adjusted by changing material formula.
②We have an outside diameter of 2.6mm、1.6mm products.It is available for selection. Consult
the manufacturer for details.
Related products
Related products
(EDI, Electro - deionization) Electro-deionization is a kind of using mixed ion of anionic and cation of the water adsorption and ion exchange resin, at the same time, the adsorption of ions and under the action of DC voltage, respectively through ion exchange membrane into the thick of anionic and cation very water chamber and removed, on the other hand, under the action of DC voltage, water can produce enough dissociation of H + ions and OH- ions, in order to realize the continuous deep desalting. This new technology can replace the traditional ion exchange (DI), produce the resistance rate is as high as 18 MΩ pure water. EDI's most significant advantage is that it no longer requires the regeneration of ion exchange resins with acids and bases, making it more environmentally friendly.
CPFC Series Flat Sheet MBR Membrane Modules
Canpure Flat Sheet MBR Membrane Module adopts PTFE membrane material, features highanti-fouling Capacity and low filtrationre sistance, suitable for gravity Filtration .It is manufactured by unique cassette Structure ,features higher packing density. Large filtration area.The module is designed stack and arranged,Large filtration area with small floor area and simple system integration and lower operating cost.
SVES/ SVEM Series Submerged Ultrafiltration Membrane Modules MBR Membrane Modules
Canpure fiber-reinforced membrane module has the characteristics of high strength, large flux and strong adaptability. The membrane module is immersed inside membrane cistern, and the system is highly integrated with good product water. Canpure fiberreinforced submerged UF membrane module can be applied in municipal/industrial waster water treatment, high-concentration organic waste water treatment, and other sectors.
SVS/SVM Series Submerged Ultrafiltration Membrane Modules MBR Membrane Modules
The Canpure curtain type membrane module adopts a full-open design to prevent polluting dead angles and is obviously advantageous in large-scale systems with the strengths such as strong adaptability to membrane water, high packing density and small floor space.
Online Message
Scan to follow us
Hunan Canpure Environmental Protection Technology Co., Ltd.
Address: No. 99, Fazhan Road, Ningxiang Economic and Technological Development Zone, Changsha City, Hunan Province
Phone: +8673188236666
Beijing Canpure Environmental Protection Technology Co., Ltd.
Address: Building 15-3, Ronghui Garden, Area B, Airport, Houshayu Town, Shunyi District, Beijing
Phone: +861084592919